#Schlage code lock how to#
#Schlage code lock manual#

This will delete the two default User Codes. Now enter your Programming Code again.Press key 6 and wait for three orange lights from the Schlage button, followed by three beeps.Enter your Programming Code and wait for the Schlage button to flash orange lights three times, followed by three beeps.

#Schlage code lock how to#

Here’s how to delete the two codes at the same time: And resetting your lock will restore the codes-even though you previously deleted them. Schlage Smart/Electronic locks usually come with two default User Codes. The Schlage button will illuminate green, followed by one long beep, showing the Programming Code has been successfully changed.

Now re-enter the new Programming Code.

Enter a new Programming Code (6 digits) and wait for the Schlage button to illuminate orange three times, followed by three beeps.

Press key 3 and wait for the Schlage button to illuminate three orange lights and the lock beep three times.

On the keypad, enter your Schlage lock default Programming Code and wait for the Schlage button to illuminate three orange lights and the lock beep three times.

Changing the Default Programming Codeįollow these steps to change the default programming code on your Schlage lock: See how to change the default Programming Code below. First off, you want to change the default Programming Code for security reasons. Next, you’ll need to reprogram your lock, as all other custom settings have been erased-because of the factory reset. This also implies that the lost Programming Code issue has been resolved. So you can now program your lock using the default Programming Code.

That said, if you’ve successfully reset your lock, it means the lost Programming Code has been erased. You can google your Schlage Lock model to find the manual-assuming you don’t have the manual.

#Schlage code lock manual#

If it doesn’t work for you, refer to your user manual for instructions. Note: This method of resetting a Schlage lock works mostly on Schlage BE365, FE575, and FE595 models. Ensure you perform this last step within 10 seconds.

Now reconnect the battery and then press and hold the Schlage button until you see a green flash, followed by a single beep.

Press and release the Schlage button on the keypad.

On your lock’s interior assembly, remove the battery cover and then disconnect the battery.

Yes, restoring factory settings will erase the current Programming Code and restore the default Programming Code, which you already have.įollow the steps below to restore factory settings on your Schlage Lock: Now, the next thing you want to do is restore factory settings on your lock to override the lost Programming Code. Note that the white label also contains two default User Codes, so be sure you get the right code. Next, write down the Programming Code (6 digits) and put the lock back on the door. If you don’t have the user manual, remove the lock from the door to find the Programming Code-printed on a white label on the back of the keypad assembly. You can find your Schlage Lock Programming Code on the front of the user manual-usually printed on a white label. You’ll need to first find the default Programming Code of your Schlage lock, as you’ll need it to reprogram your lock later on. This is the first step to resolving your lost Programming Code issue.